Symbols - A&D UA-853 Instruction Manual

Symbols

Standby and Turn the device on.
Battery installation guide
Direct current
Serial number
SN
Date of manufacture
Type BF: Device, cuff and tubing are
designed to provide special protection
against electrical shocks.
The indicator that appears while
measurement is in progress. It blinks
when the pulse is detected.
Irregular Heartbeat indicator. (I.H.B.)
The indicator that appears when an
irregular heartbeat or any excessive
body movement is detected during
the measurement.
Previous measurements stored in
MEMORY.
The battery power indicator during
Full Battery
measurement.
The battery is low when it blinks.
Low Battery
Unstable blood pressure due to
movement during the measurement.
The systolic and diastolic values are
within 10 mmHg of each other.
The pressure value did not increase
during inflation.
The cuff is not fastened correctly.
The pulse is not detected correctly.
PUL. DISPLAY ERROR
Systolic blood pressure in mmHg
SYS.
Diastolic blood pressure in mmHg
DIA.
Pulse per minute
PUL./min.
Time in the morning
AM
Time in the afternoon
PM
Alarm ON/OFF mark
EC directive medical device label
WEEE label
Symbols
Function / Meaning
English 4
Recommended Action
Measurement is in
progress. Remain as still
as possible.
Replace all batteries with
new ones, when the
indicator blinks.
Try the measurement again.
Remain very still during
the measurement.
Fasten the cuff correctly,
and try the measurement
again.
If you want to stop the sound,
press any button.