Table of Contents
Advertisement
Gigabit Ethernet Indicators
The Gigabit Network Port card has the following indicator lights:
Label
ACT/LNK
Green flashing
(Left)
10=OFF
100=GREEN
1000=YELLOW
(Right)
Access To Components
Be certain to shut down the server and disconnect the power cord before
opening the unit for service.
The following sections provide instruction on disassembly and re-assembly for maintenance.
Opening the Front Panel
The front panel is easily opened for access to the eight disk drives. Using a coin or a flat-blade
screwdriver, unscrew the two large panel fasteners on the left and right sides of the front panel.
Pull outward to remove cover.
To re-install the front panel, verify that all wires are within the chassis, then place the front
panel into position and tighten the front panel access screws just enough to be snug.
Removing the Top Cover
Use a No. 2 Philips head screwdriver to remove the 13 screws attaching the top cover, and
then lift it off.
Page 116
Indication
Green on
The port is connected to a valid link partner
Off
Off
Green
Yellow
Meaning
Data activity
No link
10 Mb/sec
100 Mb/sec
1000 Mb/sec
MAXX-2420-EX Owner's Manual
Advertisement
Table of Contents
