McIntosh MA6700 Installation And Connection Manual

1
A
RIGHT OUTPUT
connections for a
2, 4 or 8 ohm
loudspeaker
Connect the MA/MAC6700 power
cord to a live AC outlet. Refer to
information on the back panel of
your MA/MAC6700 to determine
the correct voltage for your unit
Main Fuse holder, refer to OUTPUTS 1 and 2 send signals
information on the back to Power Amplifiers and are
panel of your MA/MAC6700 switched On/Off with the Front
to determine the correct fuse Panel Output 1 and 2 Push-
size and rating Buttons or Remote Control
Push-Buttons
McIntosh Laboratory, Inc. 2 Chambers Street Binghamton, New York 13903-2699 Phone: 607-723-3512 FAX: 607-724-0549

MA/MAC6700 Rear Panel Connections

DIGITAL AUDIO INPUTS Reserved for the instal-
lation of optional Tuner
for components with Digital
Optical (1) and Coaxial (2) Module for the MA6700.
A Tuner Module is factory
Outputs sending digital
audio signals installed in the MAC6700
USB D/A Digital
Audio Input for
connection to a
computer
RECORD OUT JUMPER PLUGS con-
sends signals to nect the Preamplifier
the input of a OUTPUT 1 Jacks to the
recording device PWR AMP IN Jacks and
are required for normal
operation
RS232-C connector
1
for connection to a
computer or other
control device
DATA PORTS send IR INput for
signals to Source Com- signals from a
ponents to allow control compatible IR
with the MA/MAC6700 Room Sensor
Remote Control
SRVR(REC), DVD, CD2, PHONO MC accepts
CD and AUX INPUTS the low level signals
accept high level program from a Moving Coil
source signals Phono Cartridge
PWR AMP input GND terminal
accepts signals accepts a ground
from the internal wire from a
Preamplifier or a turntable
separate external
Preamplifier
Part No. 04142300
POWER CONTROL TRIGger
outputs 1 and 2 send turn On/
Off signals to assignable com-
ponents
POWER CONTROL MAIN
Output sends turn On/Off
signals to a McIntosh Compo-
nent when the MA/MAC6700 is
switched On/Off
MA6700 / MAC6700
BALanced INPUTS
PASSTHRU Power
accept high level pro-
Control Input receives
gram source signals
turn On/Off signals
from an Audio/Video
Control Center
PHONO MM accepts
signals from a Mov-
ing Magnet Phono
Cartridge
LEFT OUTPUT
connections for a
2, 4 or 8 ohm
loudspeaker
Refer to page 5 of the MA/MAC6700 Owner's
1
Manual for addition cable information.