Sharp PC-MR70 Manual page 70

1. In the Security menu of the Setup Utility, select Set Supervisor Password and
press Enter.
Type your current password, and press Enter. (If you set the password first
2.
time, you need not perform this step).
3. Type your (new) password (up to eight characters), and press Enter.
4. Type the same password again, and press Enter.
When the confirmation message appears, press Enter. System password Is:
5.
turns to Set.
6. In the Exit menu, select Exit Saving Changes and press Enter.
7. If you see the message Save configuration changes and exit now?, select Yes
and press Enter. The system restarts and asks the password you have set.
Deleting the Password
1. In the Security menu of the Setup Utility, select Set Supervisor Password and
press Enter.
2. Type your current password, and press Enter.
Type nothing, and press Enter.
3.
7
4. Type nothing and press Enter twice.
5. In the Exit menu, select Exit Saving Changes and press Enter.
6. If you see the message Save configuration changes and exit now?, select Yes
and press Enter. Your password has been deleted.
Windows Password
Windows has passwords which ask you when your computer resumes from
System standby/hibernate, or enters to the network system. Refer to online help of
Windows.
7-2