Security Page - Sharp PC-AR50 Manual

Security Page

See Chapter 7 for detailed information on setting passwords in the
Security page. Under some password settings, not all items are
available to all users.
Supervisor Password Is Shows the current status of the supervisor password.
User Password Is Shows the current status of the user password You cannot set the
user password unless you have set the supervisor password.
Set Supervisor Password Sets the supervisor password (up to eight characters).
Set User Password Sets the user password (up to eight characters). You cannot set
the user password unless you have set the supervisor password.
If you lose or forget your password while password protection is
enabled, you lose access to your computer. Make sure you select a
password that you will not forget, or you keep a record of your
password in a secure place. Otherwise, you must ask your dealer for
assistance.
Password on Boot Defines whether the system requires passwords during the boot
process. Enabled means that you need to input a password to continue.
Floppy Disk Access Defines who can access the floppy disk drive. Supervisor
means that only the user who knows the supervisor password can access the floppy
disk drive. User means everyone can access the floppy disk drive.
8
8-5