Table of Contents
Advertisement
4. Use the check boxes to turn on or off the display to the built-in screen (called
LCD in this window) and the external monitor (called CRT for Cathode Ray
Tube in this window).
5. Use the slider bars to adjust the resolution and the refresh rate of the display on
the external monitor.
6. Click on Apply and verify that the display is the way you want it. Click on OK to
exit the NeoMagic MagicMedia Properties window.
Switching with Hot-keys
After switching the display with software in the first instance, you can then use the
display switching hot-keys
+
F5
Fn
Switch display between the built-in screen, an
external monitor, and a simultaneous display
4
4-7
Advertisement
Table of Contents
