Boot Page; Exit Page - Sharp PC-A800 Series Manual

Resume on Time If you enable this item, the system can resume from suspend mode
by an alarm set on the computer's realtime clock.
Resume Time If you have enabled the Resume on Time item, use this item to set the
alarm time.
Cooling Control Use this item to determine how the system controls the thermal
management of your system. If you select Performance, the system turns on the
cooling fan first when cooling is required. It only throttles the processor if further
cooling is required. If you select Silence, the system throttles the processor first
when cooling is required. It only turns on the cooling fan if further cooling is
required.

Boot Page

The Boot page shows the order of preference your system follows when it seeks an
operating system at start-up time. To change the order, highlight an item and then
use the Plus and Minus keys to move it up or down the list.

Exit Page

Exit Saving Changes Saves the settings you have changed and exits the Setup
Utility.
Exit Discarding Changes Exits the Setup Utility without saving the changes you
made during the current session.
Load Setup Defaults Returns the values of all items to default. To exit, select one
of the above items.
Discard Changes Returns the values of all items to the values you last saved.
Save Changes Saves the settings you have changed.
8
8-7