Power Page - Sharp PC-A800 Series Manual

Power Page

Because your computer supports ACPI (Advanced Configuration and Power
management Interface), a powerful feature of the Windows 98 operating system, the
power management for your system is controlled by the Windows OS and the items
on this page have no function. See Chapter 3 for information on using the Windows
Power Management Properties program.
If you install your computer with an alternative operating system that does not have
ACPI (for example Windows NT 4.0), you can use the items on this page to manage
power on your system.
PM Control Lets you enable or disable all the power management, or have it
operate when you are using Battery Powered Only.
Power Savings Lets you set Maximum Battery Life (short timeouts for aggressive
power management), Maximum Performance (long timeouts for relaxed power
management), or Customized (lets you define your own timeout settings using the
items below).
Auto Suspend Timeout If you have chosen Customized for the Power Savings item,
use this item to set the timeout for suspend mode.
Hard Disk Timeout If you have chosen Customized for the Power Savings item, use
this item to set the timeout for a hard disk drive powerdown.
8
Video Timeout If you have chosen Customized for the Power Savings item, use this
item to set the timeout for the built-in display to powerdown.
Battery Low Suspend If you enable this item, the system will automatically enter
the suspend mode when battery charge is critically low.
Resume on Modem Ring If you enable this item, the system can resume from
suspend mode when an incoming call is received by the modem.
The built-in modem may not be available in some countries .
8-6