Advanced Page - Sharp PC-A800 Series Manual

Extended Memory Shows the size of extended memory beyond 1 MB.

Advanced Page

Serial port Sets the RS-232C serial port (only available on the optional Port
Replicator), selecting the base I/O address. Enabled means that you can set the item
yourself. Auto means that the item is automatically assigned. Disabled means that
you cannot use the port.
IrDA port Sets the infrared port, selecting the I/O address and IRQ channel, and the
DMA channel. Enabled means that you can set the items yourself. Auto means that
all the items except the mode are automatically assigned. Disabled means that you
cannot use the port. Set to Auto during normal use.
Parallel port Sets the printer port, selecting the mode, the base I/O address, and the
IRQ channel. Enabled means that you can set the items yourself. Auto means the
items except the mode are automatically assigned. Disabled means that you cannot
use the port.
Mode Specifies the LPT port mode: Bi-directional, ECP (Extended Capabilities
Port mode), EPP (Enhanced Parallel Port mode) or Output Only. If you set the mode
to ECP, you can also select a DMA channel.
8
8-4