Quick Setup; Turning Power On - Sharp PC-A280 Manual

Quick Setup

Your computer is designed and pre-configured for easy setup and use. This chapter
describes the steps to get your computer up and running as quickly as possible. Read
this chapter first.

Turning Power On

Your computer is powered with either the rechargeable battery or AC power. See the
next chapter for more information on power sources. Before using the computer for
the first time:
1. Remove the battery protection sheet on the bottom of the computer.
If you do not remove the sheet, you cannot turn on the computer.
Battery Protection Sheet
2. Plug the AC adapter cable in the plug on the left side of the computer.
3. Plug the AC power cord into the AC adapter.
Always use the AC adapter included with the computer or the optional
one(may not be available in some countries). Using other AC adapters
may damage the computer.
Always hold the AC power cord by its plug when removing it from the
wall outlet. Never pull on the cord.
When using the computer for the first time, be sure to connect it to AC
power. If using the battery instead, you may not be able to complete the
Windows 98 setup if the battery does not have enough power.
CHAPTER 1
1-1
1