Amana Gas Range Installation Instructions Manual page 4

!
WARNING
To avoid risk of burns or fire by
reaching over elements, cabinet
storage space located above
range should be avoided. If
cabinet storage is provided,
install a range hood that projects
horizontally a minimum of 5
inches beyond the cabinet bottom
to reduce the risk.
!
WARNING
To avoid risk of electrical shock,
personal injury, or death, make
sure your range has been
properly grounded and always
disconnect it from main power
supply before servicing.
This range can be installed flush against right and left base
cabinets, and rear vertical wall. The dimensions provided
are to be measured from the range itself, and not the
installation cutout for the range.
A—Minimum of 30 inches between top of cooking surface
and bottom of an unprotected wood or metal cabinet.
A—Minimum of 24 inches between cooking surface and
protected wood or metal cabinet above range. Cabinet
bottom must be protected by at least ¼ inch thick millboard
with not less than No. 28 MSG sheet steel, .015 inch thick
stainless steel, .024 inch thick aluminum, or .020 inch thick
copper.
B—Minimum of 30-inches of protected cabinets above the
range.
C—Minimum of 18" between top of countertop and bottom of
an unprotected wood or metal cabinet.
D—Maximum depth of 13" for overcounter cabinets.
E—Minimum of 3 inches to a vertical right or left side wall
extending above cooking surface.
F—Maximum depth of 25 inches.
G—Maximum of 36 inch cabinet height.
Part No. 36-32018601-0
Printed in U.S.A. 08/00
To reduce risk of the appliance tipping, it must be secured by a
properly installed anti-tip bracket. To make sure bracket has been
installed properly, remove the storage drawer or panel and look
under the range with a flashlight. Bracket must be engaged in the
rear corner of the range.
!
WARNING
• ALL RANGES CAN TIP
• INJURY TO PERSONS
COULD RESULT
• INSTALL ANTI-TIP
BRACKET(S) PACKED
WITH RANGE
• SEE INSTALLATION
INSTRUCTIONS
2000 Amana Appliances
Amana, Iowa 52204