Error Correction Mode - Sharp UX-B30 Operation Manual

♦
Under certain conditions (for example if a person answers the call on a
telephone), automatic redialling may stop before two redialling attempts are
made.

Error Correction Mode

The fax machine is set to automatically correct any distortions in a
transmission due to noise on the telephone line before printing at the
receiving end. This function is called Error Correction Mode (ECM). ECM is
effective for both transmissions and receptions, and is only effective when the
other fax machine has ECM as well.
When there is considerable noise on the line, you may find that transmission
with ECM turned on takes longer than normal. If you prefer a faster
transmission time, you can try turning ECM off.
1
Press once and
2
Press once and
3
Press once.
4
Press to select YES, or
select NO.
5
Press to return to the date and time display.
Sending a Fax by Automatic Dialling
3 times.
4 times.
to
Display:
OPTION SETTING
ECM MODE
1=YES, 2=NO
The display briefly shows
your selection, then:
ERROR BEEP
49