Clutch System - Honda TRX420TE/FE Owner's Manual

06/10/24 13:18:45 32HP4800_141

Clutch System

Your ATV's shift-activated, wet, multiplate clutch is part of the primary
drive system. Proper adjustment allows a smooth, gradual engagement
when shifting gears.
Clutch Adjustment
Refer to Saf ety Precautions
FRONT
(1)
(2)
(1) lock nut
1. Make sure the engine is cool.
2. Make sure the ignition switch is OFF (
3. Remove the seat (page
4. Loosen the lock nut ( ).
5. Turn the clutch adjuster ( ) counterclockwise until you feel slight
resistance.
6. Turn the adjuster 1/4 turn clockwise, then tighten the lock nut to hold
the adjuster in this position.
7. After adjustment, start the engine and test ride your ATV to be sure
the clutch is operating properly.
8. Install the removed parts in reverse order of removal.
If you cannot get proper adjustment, or the clutch does not work
properly, the clutch friction discs may be worn. See your Honda dealer
or refer to official Honda Shop Manual.
132 Servicing Your Honda
on page 89 .
(2) clutch adjuster
).
100 ) and left side cover (page
1
2
108 ).