06/10/24 13:26:39 32HP4800_194
If the Shift Switches Do Not Function
If one or both shift switches do not function, see the following
instructions. If proper function cannot be restored, see your Honda
dealer.
When the engine is running:
1.
Stop the ATV.
2.
Turn the ignition switch to the ''OFF'' (
3.
After the engine stops, turn the ignition switch to the ''ON'' (
position.
4.
Press both shift switches and check that they are functioning.
5.
If both switches are functioning, shift into neutral and restart the
engine.
If one or both switches are not functioning, see
Selection & Operation,
When the engine is stopped (ignition switch at ''ON'' (
1.
Turn the ignition switch to the ''OFF'' (
2.
Turn the ignition switch to the ''ON'' (
3.
Press both shift switches and check that they are functioning.
4.
If both switches are functioning, shift into neutral and restart the
engine.
If one or both switches are not functioning, see
Selection & Operation,
When the battery is low (or dead):
See
If the Battery Is Low (or Dead),
) position.
page
186
.
) position.
) position.
page
186
.
page
199
.
Taking Care of the Unexpected
)
Emergency Gear
)):
Emergency Gear
185