Advertisement
Installing the Audio Unit and Pocket Assembly
5.
While holding the audio unit close to the center
panel opening, plug the vehicle 20-pin connector
and antenna lead into the back of the audio unit.
VEHICLE 20-PIN
CONNECTOR
AUDIO
UNIT
XXXXXXXXXXX
4 x 16 mm
XXXXXXXXXXX
SELF-TAPPING
SCREWS
XXXXXXXXXXX
6.
Slide the audio unit and pocket assembly into the
center panel opening and install the four
4 x 16 mm self-tapping screws.
XXXXXXXXXXXXXXXXXXXXXXXXX 5 x 16 screws
7.
Turn the ignition key on, and enter the radio
anti-theft code.
8.
Check the operation of the audio unit as described
in the Owner's Manual supplied.
9.
Set the radio clock.
10. Reinstall all removed parts.
11. Put the AM/FM CD Tuner Owner's Manual in the
glove box.
©
2002 American Honda Motor Co., Inc - All Rights Reserved.
ANTENNA LEAD
use the 5 x 16 screws that
were included separately,
not the 4 x 16 self tapping
2828210K
ones
AII 24298 (0212)
3 of 3
Advertisement
