Table of Contents
Advertisement
❖ ❖ ❖ ❖ Tray Paper Size: Tray 3, Tray 4 (when Cut Paper Trays are installed)
You can specify the size of paper in Tray 3 and Tray 4.
• The paper sizes you can select are as follows:
• Auto, A2L, A3K, A3L, A4K, A4L, B3 JISL, B4 JISL, B4 JISK,
18"×24"L, 17"×22"L, 12"×18"K, 12"×18"L, 12"×14
11"×17"L,11"×15"L, 11"×14"K, 11"×14"L, 10"×14"K, 9"×12"K,
9"×12"L, 8
1
8
/
"×12"L, 8
2
Note
❒ Default: Auto
❖ ❖ ❖ ❖ Paper Type: Bypass tray
You can specify the paper type in the paper bypass.
• The paper types you can set for the paper bypass are as follows:
• No Display, Recycled Paper, Translucent Paper, Film
Note
❒ Default: No Display
❖ ❖ ❖ ❖ Paper Type: Tray 1–4
You can specify the paper type in Tray 1 to Tray 4.
• The paper types you can set for the trays are as follows:
• No Display, Recycled Paper, Translucent Paper, Film
Note
❒ Default:
• Paper Type: No Display
• Apply Auto Paper Select: Yes
❒ When Cut Paper Trays are installed, you cannot select [Film] in Tray 3 and Tray 4.
❒ A
mark appears next to the paper tray if [No] is selected in Auto Paper Select.
Timer Settings
❖ ❖ ❖ ❖ Auto Off Timer
After a specified period, following job completion, the machine automatically
turns off, in order to conserve energy. This function is called "Auto Off".
The machine status after Auto Off is referred to as "Off mode". You can spec-
ify the time to elapse before Auto Off is activated.
Note
❒ Default: 60 minutes
❒ Enter a time interval between 10 seconds and 240 minutes using the num-
ber keys.
❒ Auto Off may not work when error messages appear.
1
1
/
"×14"K, 8
/
"×14"L, 8
2
2
1
1
/
"×11"K, 8
/
"×11"L
2
2
Settings You Can Change with User Tools
1
/
"L, 11"×17"K,
2
1
1
/
"×13"L, 8
/
"×12"K,
2
2
4
63
Advertisement
Table of Contents
