HORIZONTAL
Slightly loosen the adjustment screws and position the antenna so that the top of
the antenna pod is level, with the top of the pod horizontal to the sky as shown.
When the antenna is adjusted correctly, tighten the adjustment screws but be
careful not to overtighten them.
Continue with the installation procedure for your particular configuration:
—
Simple Configuration Installation Procedure (Single LNB, No Multi-
switch) on page 27
—
Before Multiswitch Configuration Installation Procedure on page 29
—
After Multiswitch Configuration Installation Procedure (Multiswitch
on Roof) on page 31
—
After Multiswitch Configuration Installation Procedure (Multiswitch
Inside Home) on page 33
6
Antenna Pod
Adjustment
Screw
SKY
1
Adjustment
2
Screw
Home Signal Distribution Kit Installation Guide
LEVEL