Battery Installation - Fisher-Price HOT WHEELS C0530 Owner's Manual & Assembly Instructions

I
IMPORTANT! Use only a Power Wheels
Use of any other battery will damage your vehicle. Make
sure that you charge the battery for at least 18 hours using
the enclosed Power Wheels
operating your vehicle for the first time. Charge the battery
for at least 14 hours after each use of the vehicle. Never
charge the battery longer than 30 hours. Failure to follow
these instructions may damage your battery and will void
your warranty. It is easier to install the battery before
assembling the hood to your vehicle.
1
• While pressing the release button on the battery cover
(clamp), lift to remove the the battery cover (clamp).
2
• Plug the motor harness connector into the 12 volt
battery. Push firmly to make sure the connector is
inserted properly.
• Fit the battery into the battery compartment, as shown.

Battery Installation

® 12 volt battery.
® 12 volt charger before
Battery Cover
(Clamp)
Release
Button
Motor
Harness
3
• Fit the tabs on the battery cover (clamp) into the slots
under the seat.
• Lower the battery cover (clamp) and "snap" into place.
17
Tabs