Fisher-Price HOT WHEELS C0530 Owner's Manual & Assembly Instructions page 11

11
• Fit the rear bumper onto the rear end of the frame.
12
1 / " - 20 x 3"
4
Screws
Bottom View
• While holding the rear bumper in place, turn the frame
on its side.
• Insert two 1 / " - 20 x 3" screw through the bottom of the
4
frame and out through the top of the rear bumper.
Assembly
13
Rear
Bumper
• From the top side of the frame, attach a
1 / " - 20 lock nut to each screw.
4
• While holding the 3" screws steady with a Phillips screw-
driver, tighten the lock nuts with an adjustable wrench.
14
• Turn the frame upright.
• Fit the pretend motor to the top side of the rear bumper.
• Insert three #8 x
Do not over-tighten these screws.
11
Top View
1 /
#8 x 3 / "
4
Screws
3 / " into the pretend motor and tighten.
4
" washer and
4
Pretend
Motor