Seagate ST1.3 Series Product Manual page 32

Table 8: 35-way ZIF (IDE interface) connector signals
22 IORD-
23 CS1-
24 CS0-
25 D15
26 D07
27 D14
28 D06
29 D13
30 D05
31 D12
32 D04
33 D11
34 D03
35 GND
For ST1.3 Series, drive is operating in master-mode only, and the DASP# (Drive Active/Slave
Note.
Present) that is commonly used to drive LED light to indicate drive activity is not available.
26
I/O Read
DMA ready during Ultra DMA data-in bursts
DMA strobe during Ultra DMA data-out bursts
Chip select 1
Chip select 0
Data bus bit 15
Data bus bit 07
Data bus bit 14
Data bus bit 06
Data bus bit 13
Data bus bit 05
Data bus bit 12
Data bus bit 04
Data bus bit 11
Data bus bit 03
Ground
ST1.3 Series Product Manual, Rev. C