Auto Settings : D-Sub Input; Settings : Pcoip Input - LG N2311AZ Owner's Manual

aUTo settings : D-sUb Input

1
Press any button on the front of the monitor to dis-
play the MonIToR sETUP OSD menu.
2
Press the aUTo button to automatically adjust the
screen.
3
Select EXIT to leave the OSD menu.
To return to the upper menu or set other menu items,
use the up arrow ( ) button.
Pressing the AUTO button allows the monitor to automatically optimize the screen to the current display
mode.
If you are not satisfied with the optimized screen, you can manually adjust the position of the display area,
frequency, phase and sharpness in the OSD menu.
(Only available for D-SUB [analog] signals. Note that the sharpness setting is only available for digital sig-
nals.)
noTE
What is "Auto Image Adjustment"? The Auto Image Adjustment option allows you to improve the
y
picture quality if the screen is dimmed, if the text appears blurred or spread, if the screen flickers or
if the display area is not centered after adjusting the resolution. (Only available for D-SUB [analog]
signals.)

- / / - settings : PCoIP Input

1
Press any button on the front of the monitor to display the MonIToR sETUP OSD menu.
2
Press the button for at least three seconds to disconnect from the server.
noTE
In PCoIP mode, press the button for at least three seconds to disconnect from the server.
y
CUsToMIZInG sETTInGs
PRoCEssInG aUTo IMaGE aDJUsTMEnT
foR oPTIMal DIsPlaY
CHanGE REsolUTIon To 1920 x 1080
23