Output Frequency; Output Pan; Output Shelf; Resonance - Lexicon PCM NATIVE EFFECTS BUNDLE Owner's Manual

Output Frequency

This parameter lets you set the cutoff frequency of the output filter. The audible effect of this is
determined by the Output Filter Type parameter.

Output Pan

Routes the post-filter delay voice across the left-right soundstage.

Output Shelf

This parameter effects all output filter types. It allows a certain amount of unfiltered audio to be
combined with the filtered audio. This effectively lowers the effect of the filter. Another way of
looking at it is that it lessens the normal filter slope of 12 dB per octave. Unlike the traditional
biquad filter, the shelf is effective for all filter forms.

Resonance

This parameter is found in the Resonant Chords algorithm and determines how much of the
resonance effect will be added to the delay voice.

Resonance Detune

This parameter is found in the Resonant Chords algorithm and acts as an adjustment to the
specified frequency for the voice's resonator. The calculation of cents yields a ratio which is used
to modify the specified frequency of the voice. This parameter is then modified by the Detune
Master parameter.

Resonance Frequency

This parameter is found in the Resonant Chords algorithm and determines at which frequency
the delay voice resonates. It can be adjusted by frequency (Hz) or musical notes (Equal
Tempered).

Resonance Master

Controls all voices in the algorithm. Each voice has its nominal resonance adjusted by this
percentage.
48