All Other Parameters; Blend; Delay Feedback Master; Delay Level - Lexicon PCM NATIVE EFFECTS BUNDLE Owner's Manual

Harman with the pcm native effects bundle

Hide thumbs

Table Of Contents

Table of Contents

Blend

This parameter is found in the Resonant Chords algorithm and adjusts how much of the direct

signal is allowed to pass along with the effect from the resonator (Off meaning you hear only the

resonance effect and none of the direct signal and 0.0 dB meaning you hear an equal amount of

direct signal and the resonance effect). This is a global control which affects all voices.

Delay Feedback Master

Controls all delays in the algorithm. Each voice has its nominal feedback gain adjusted by this

percentage.

Delay Level

This parameter adjusts the output level of the delay line within each voice.

Delay Level Master

Controls all delays in the algorithm. Each voice has its nominal gain value adjusted by this

percentage.

Delay Pitch Master

This parameter is found in the MultiVoice Pitch algorithm and controls all pitch levels in the

algorithm. Each voice has its pitch level value adjusted by this percentage.

Delay Time

Delay time defines the time offset of a delay voice. This parameter can be adjusted in one of

two ways, they are:

•

Absolute - Adjusts the delay time in seconds/milliseconds.

•

Tempo - Adjusts the delay time in fractions of tempo (quarter note, eighth note, etc.). This

tempo is synced to the DAW's session tempo.

This parameter is used in many of the algorithms, not just the delays. In all cases, it does the

same thing.

Content Checked