Delay Feedback Master; Voice Parameters; Delay Time; Delay Level - Lexicon PCM NATIVE DUAL DELAY Owner's Manual

Delay Feedback Master

Controls all delays in the algorithm. Each voice has its nominal feedback gain adjusted by this
percentage.

Delay Time

Delay time defines the time offset of a delay voice. This parameter can be adjusted in one of
two ways, they are:
• Absolute: Adjusts the delay time in seconds/milliseconds.
• Tempo: Adjusts the delay time in fractions of tempo (quarter note, eighth note, etc.). This
tempo is synced to the DAW's session tempo.

Delay Level

This parameter adjusts the output level of the delay line within each voice.

Feedback Level

This parameter determines the feedback level for a particular voice. It is controlled
independently of the voice's output level.

Output Pan

Routes the post-filter delay voice across the left-right soundstage.

Feedback Pan

This parameter controls the left-right soundstage of the feedback portion of the delay line
signal.

Output Filter Type

This parameter allows you to assign a filter on the output of a delay voice. There are 6
selections available, they are: 1 Pole Lopass, 1 Pole Hipass, 2 Pole Lopass, 2 Pole Hipass,
Bandpass, and Notch.

Output Frequency

This parameter lets you set the cutoff frequency of the output filter. The audible effect of this is
determined by the Output Filter Type parameter.
Content Checked

Voice Parameters

25