The Stereo/Phase Analyzers; Lissajous Figure Window; Stereo Width Meter - Lexicon PCM NATIVE EFFECTS BUNDLE Owner's Manual

The Stereo/Phase Analyzers

These analysis tools provide visualizations of the output signal's stereo image and phase
response.
Lissajous Figure
Window

Stereo Width Meter

Lissajous Figure Window

This window shows the width of the stereo image and the signal's phase response, represented
using a Lissajous figure as would be seen on an Oscilloscope. The width of the stereo image is
displayed by how far out–from center–the lines spread. The phase response is then displayed
by the rightward slant of the overall graph. Therefore, a thin vertical line represents completely
mono/in phase content and a thin horizontal line represents completely mono/out of phase
content.
Stereo Width Meter
This meter shows the perceived width of the stereo image in a different way. A mono signal
would show no level. A true stereo signal will display a wider bar, while inverted mono
will display at the maximum width. The widest signals may exhibit problems with mono
compatibility, so they should be monitored. The left and right side of this meter will always show
identical level. The greater the meter level, the wider the stereo image will be perceived.
6