Output Pan; Feedback Pan; Output Filter Type; Output Frequency - Lexicon PCM NATIVE MULTIVOICE PITCH Owner's Manual

Content Checked

Output Pan

Routes the post-filter delay voice across the left-right soundstage.

Feedback Pan

This parameter controls the left-right soundstage of the feedback portion of the delay line
signal.

Output Filter Type

This parameter allows you to assign a filter on the output of a delay voice. There are 6
selections available, they are: 1 Pole Lopass, 1 Pole Hipass, 2 Pole Lopass, 2 Pole Hipass,
Bandpass, and Notch.

Output Frequency

This parameter lets you set the cutoff frequency of the output filter. The audible effect of this is
determined by the Output Filter Type parameter.

Output Bandwidth

When Bandpass or Notch have been selected, this parameter allows you to set the bandwidth
of an output filter. Bandwidth is specified in octaves or fractions thereof.

Output Shelf

This parameter affects all output filter types. It allows a certain amount of unfiltered audio to be
combined with the filtered audio. This effectively lowers the effect of the filter. Another way of
looking at it is that it lessens the normal filter slope of 12 dB per octave. Unlike the traditional
biquad filter, the shelf is effective for all filter forms.

Feedback Filter Type

This parameter allows you to assign a filter on the feedback portion of the signal within a delay
voice. There are 6 selections available: 1 Pole Lopass, 1 Pole Hipass, 2 Pole Lopass, 2 Pole
Hipass, Bandpass, and Notch.

Feedback Frequency

This parameter lets you set the cutoff frequency of the feedback filter. The audible effect of this
is determined by the Feedback Filter Type parameter.
24