IMPORTANT! Before assembly and each use, inspect this product
for damaged hardware, loose joints, missing parts or sharp edges.
DO NOT use if any parts are missing or broken. Contact Fisher-Price
for replacement parts and instructions if needed. Never substitute parts.
Seat Bottom
1
•
Turn the seat bottom upside down on a flat surface.
•
Position a back leg so that it curves up and fit it into a large
socket in the seat bottom.
Hint: If the leg does not seem to fit into the seat bottom socket,
try the other back leg.
2
•
Insert an M5 x 60mm screw into the side of the seat bottom
and tighten.
•
Push the back leg until it
Back Leg
Large Socket
PUSH
M5 x 60mm
Screw
"snaps" in place.
Assembly
®
Back Leg
3
•
Fit the other back leg into the large socket in the seat bottom.
PUSH
M5 x 60mm
Screw
4
•
Insert an M5 x 60mm screw into the side of the seat bottom
and tighten.
•
Push the back leg until it
4
"snaps" in place.