Rear Panel - Laney LV300 Instructions Manual

REAR PANEL

~115V
~220V/~230V
1
2
MAXIMUM POWER CONSUMPTION
300 WATTS 50/60Hz
Power inlet socket. Make sure the specified voltage is correct for your country!
This drawer contains the main safety fuse for the unit.
The mains fuse ratings are detailed on page 7 of this manual
Displays the model number, power requirements and serial number of the unit.
Connect an extension loudspeaker cabinet here, the internal loudspeaker remains connected. The
impedance of the extension cabinet must not be less than 8 Ohms, (4 Ohms on the Head). Connecting
cabinets that have a lower impedance will result in the amplifier overheating. .
Line level FX Loop Return to connect back from an external effects controller.
Line level FX Loop Send to connect to an external effects controller.
Connect a dedicated Laney LV3Way footswitch here (included) to allow remote switching of the reverb and
channels. Drive channel must be enabled (with )
14
L Z B 1 2 3 4
3
4
L Z B 1 2 3 4
7
300H
~115V
~220V/~230V
300 300TWIN