Rear Panel - Laney LV200 Instructions Manual

REAR PANEL

SUPPLY VOLTAGE & FUSE RATING
~115V T2A L 250V
~220V/~230V T1A L 250V
1
2
L Z B 1 2 3 4
3
Power inlet socket. Make sure the specified voltage is correct for your country!
1
This drawer contains the main safety fuse for the unit.
2
The mains fuse ratings are detailed on page 7 of this manual
Displays the model number, power requirements and serial number of the unit.
3
Connect your headphones here for silent practice. The internal and any extension loudspeakers are
4
automatically muted.
Connect an extension loudspeaker cabinet here, the internal loudspeaker remains connected. The
5
impedance of the extension cabinet must not be less than 8 Ohms. Connecting cabinets that have a lower
impedance than 8 Ohms will result in the amplifier overheating. Continual use in this manner may cause
permanent damage.
Line level FX Loop Return to connect back from an external effects controller.
6
Line level FX Loop Send to connect to an external effects controller.
7
Connect a dedicated Laney LV3Way footswitch here (included) to allow remote switching of the reverb
8
and channels. Drive channel must be enabled (with )
12
4 5
7
8
6 7