System; Setting The Date And Time; Managing Mysafe Usb External Hard Drive - LaCie Internet Space User Manual

LaCie Internet Space
user Manual
9.4.

System

9.4.1.

Setting the Date and Time

Click Notifications under System and set the correct date and
time for your time zone. This will ensure that file upload dates
and times will be accurate and will help you to better manage
your Ethernet disk.
9.4.2. Managing MySafe USB External
Hard Drive
Click USB External Storage
external USB hard drive (if you have connected one). When your
drive is connected properly, its model name, capacity and space
available are displayed.
To disconnect the drive from your Ethernet disk, click the
Remove Drive button and wait for a message indicating that it
is save to disconnect the device.
To make the drive available again, reconnect it and click
Drive.
To format the drive and permanently erase its contents, click
Safely Remove Drive. Click the
appears.
CAUTION: Formatting your external USB hard drive will erase
all data on the drive. Back up any data you want to save before
formatting.
• deSIgn by neIL pouLton
to manage your MySafe attached
Safely
Format Drive button when it
Figure 9.4.1
Use
Figure 9.4.2
Administration
page 52