Kyocera Hydro User Manual page 97

Using both data service and hotspot drains your device's battery at a much faster

rate than when using any other feature combination.
Note: The best way to keep using the device as a hotspot is to have it connected to a power
supply.
Important: Write down the passkey (password) for this WEP/WPA/WPA2 PSK
communication (shown onscreen).
Connect to Portable Wi-Fi Hotspot
1. Enable Wi-Fi (wireless) functionality on your target device (laptop, media device,
etc.).
2. Scan for Wi-Fi networks from the device and select your device hotspot from the
network list.
Your device name can be changed by pressing Home

Portable Wi-Fi hotspot > Network SSID.
3. Select this device and follow your onscreen instructions to enter the passkey
(provided on the Portable Wi-Fi hotspot page).
4. Launch your Web browser to confirm you have an Internet connection.
Configure Mobile Hotspot
1. Press Home
2. Set the following options:
 Network SSID: Sets your network name.
Security: Sets the security level.

Password: Sets a password if necessary.

Maximum Wi-Fi clients: Sets the maximum Wi-Fi clients that can connect to your

device.
 Auto off: Sets the length of time to elapse when your hotspot feature is disabled if
there is no device connected.
 Channel: Selects the channel you want to use.
 Press Menu
router IP settings or DHCP server settings.
and touch > Portable Wi-Fi hotspot.
and touch Advanced: Sets the advanced settings, such as local
88
and then touching >