Unmount And Mount The Microsd Card; Use The Device's Microsd Card As A Usb Drive - Kyocera Hydro User Manual

2. Scroll down the screen, touch Erase SD card > Erase SD card > Erase everything.
Note: The formatting procedure erases all the data on the microSD card, after which the
files CANNOT be retrieved. To prevent the loss of important data, please check the
contents before you format the card.

Unmount and Mount the microSD Card

You need to unmount the microSD card first before removing it to prevent corrupting the data
stored on it or damaging the microSD card. Also, you need to mount the microSD card for
using it.
To unmount the microSD card:
1. Press Home
2. Touch Unmount SD card > OK.
To mount the microSD card:
► Press Home

Use the Device's microSD Card as a USB Drive

To transfer music, pictures, and other files from your computer to your device's microSD
card, you need to set the device's microSD card as a USB drive.
1. Connect the device to your computer using the supplied USB cable.
2. If you see
touch the USB connection notification.
3. Touch Mass Storage > Done. See
4. On your computer, the connected device is recognized as a removable disk. Navigate
to this removable disk and open it.
5. Do one of the following:
 Copy files from the computer to the root folder on the device's storage card.
Copy files from the device's storage card to a folder on your computer or computer

desktop.
6. After copying the files, unmount the removable disk (that is, the connected device) as
required by your computer's operating system to safely remove your device, and
disconnect the device from the computer.
> Menu and touch System settings > Storage.
> Menu and touch System settings > Storage > Mount SD card.
on the status bar, slide it down to open the Notifications panel and
PC Connection.
120