Korg Pa588 User Manual page 225

4. Select the desired bank, and press Open to gain access to
the single files.
5. Once you have selected the file that you want to save, press
Save To to confirm the selection. The list of files in the card
is shown.
6. At this point, you can:
• Press the New SET button and create a new ".SET" folder
(see "Creating a new ".SET" folder" on page 221), or
• Select an existing ".SET" folder, and press Save to confirm.
7. A dialog box appears, asking you to select one of the avail-
able User locations inside the selected folder
In the above dialog box, the previously selected Style will be
saved to location 01 inside the bank U01 (corresponding to
the USER1 button) inside the selected folder.
8. Press OK to confirm, or Cancel to abort.
Warning: After confirming, the same item in the target folder
is deleted.
Media edit mode
Creating a new ".SET" folder
Pa588 proprietary data must be saved in special folders with the
".SET" extension. These special folders can be saved inside ordi-
nary folders.
When saving, you can save onto existing ".SET" folders, or you
can create a new folder of this type. Here is how to do it.
1. When the directory of the card is shown in the display, the
"New SET" button appears among the buttons below the
file list.
2. Press the New SET button. A dialog box appears, asking
you to enter a name for the new ".SET" folder.
3. Press the (Text Edit) button to open the Text Edit win-
dow. Enter the name, then press OK to confirm and close
the Text Edit window.
4. Press OK to create the new folder and exit the dialog box.
221
Save