Korg Pa588 User Manual page 23

7
PHONES connector
Connect a pair of headphones to this output. You can use head-
phones with an impedance of 16-200Ω (50Ω suggested). Use a
headphone splitter to connect more than one pair of head-
phones.
Note: When inserting a jack into this connector, the speakers are
automatically turned off.
8
OUT (L/MONO, R) connectors
Use these unbalanced connectors to send the audio signal
(sound) to a mixer, a PA system, a set of powered monitors, or
your hi-fi system. Connect only the L/MONO jack to output the
signal in mono. Set the output level with the MASTER VOLUME
slider.
Note: This MASTER VOLUME slider does not control the signal
entering the audio inputs (see below).
9
IN (L/MONO, R) connectors
Use these unbalanced connectors to input another keyboard/
synthesizer, a CD or MP3 player, or a mixer's (non-powered)
output. The signal goes directly to the final mix.
0
DC 12 V power adapter connector
Plug the supplied power adapter into this connector.
A
Cable holder
Fix the power cable to this hook, to avoid cable jamming.
B
STANDBY/ON switch
Use this switch to turn the instrument on or off.
On The instrument is turned on.
Standby The instrument is turned off.
Rear panel 19