Setting The Security Function - Kenwood DDX4028BT Instruction Manual

Setting the security function

You can set a security code to protect your
receiver system against theft.
• When <SI> is activated (☞ right column),
the code cannot be changed.
Registering the security code
1
Display the security code
setting screen.
On <Top Menu>:
• To clear the registered security code,
perform step
<Security Code>.
6
DDX4028BT/DDX4058BT/DDX3028/DDX3058
1
and press [CLR] in
2
Enter a four-digit number (1),
then confirm the entry (2).
Deletes the last entry
3
Repeat step
security code.
Now, your security code is registered.
• When the unit is being reset or
disconnected from battery, you are
required to enter the security code. Enter
the correct security code, then press
[Enter].
Activating the security
function
You can activate the security indicator to
protect your receiver system against theft.
On <Setup>:
The security indicator on the monitor
panel flashes when the vehicle ignition
is off.
To cancel, select <OFF>.
Cancels the setting
2
to confirm your