Using The Bluetooth Mobile Phone - Kenwood DDX4028BT Instruction Manual

Using the Bluetooth mobile phone

Receiving a call
When a call comes in/making a call...
Ends/rejects the call
Status of the device/Battery reminder (only
when the information comes from the
device)
• Phone operation is not available while
the picture from the rear view camera is
displayed. (☞ page 37)
When <Auto Response> is set to <On>
The unit answers the incoming call
automatically. (☞ page 50)
Adjusting the volume of
microphone
While talking...
• This adjustment does not affect the volume
level of the other sources.
• To adjust the volume of calls/earpiece, use
the volume knob on the monitor panel.
Call information
(if acquired)
While talking...
Each time you press the button, the talking
method is switched (
mode /
If the mobile phone is compatible with SMS
(Short Message Service) , the unit tells you a
message has been received.
Switching between
handsfree mode and phone
mode
: phone mode).
Checking SMS reception
To read a received message, operate the
mobile phone after stopping the car in a
safe place.
• You cannot read, edit, or send a message
through the unit.
: handsfree
45
English