Stun; Redialing - Kenwood NEXEDGE NX-720 Instruction Manual

11 Press the S or
■ Removing an Autodial Entry
1 Press the key programmed as [Autodial Programming].
2 Press the
3 Press the A or # key.
• "DELETE" appears on the display.
• Additionally, you can press and hold the A or # key to delete all entries.
4 Press the S or

REDIALING

1 Press the key programmed as [Autodial].
2 Press the key, then press the 0 key.
• If there is no data in the redial memory, an error tone will sound.
3 Press the PTT switch to make the call.

STUN

This function is used when a transceiver is stolen or lost. When the transceiver receives a
call containing a stun code, the transceiver becomes disabled. The stun code is cancelled
when the transceiver receives a call with a revive code.
• "STUN" appears on the display while the transceiver is stunned.
key to accept the number and store the entry.
/ key to select a memory location number.
key key to confirm the deletion.
15