Fisher-Price MX3 73535 Owner's Manual & Assembly Instructions page 9

8
Foot Peg
1 9 / " Bolt - 2
16
BOTH SHOWN ACTUAL SIZE
• Fit a foot peg to the end of the bar on the bottom of the
mini-bike.
• Turn the foot peg to align the hole in the foot peg with
the hole in the bar.
• Insert a 1 9 / " bolt through the front hole in the bar, the
16
foot peg and out the back hole in the bar.
• Attach a / " lock nut (rounded edge outward) to the end
7
16
of the bolt and hand-tighten it.
Bar
Foot Peg
Rounded Edge
7 / " Lock Nut - 2
16
Assembly
9
• While holding the lock nut with an adjustable wrench
(or a / " wrench), tighten the bolt with the Allen wrench.
7
16
Do not over-tighten.
• Check to be sure the foot peg is securely attached.
Push and pull it. It should not move. If it does move,
tighten the bolt a few more turns with the Allen wrench.
• Repeat steps 8 and 9 to fasten the other foot peg to the
bar with a 1
9
9 / " bolt and 7 / " lock nut.
16 16