Fisher-Price MX3 73535 Owner's Manual & Assembly Instructions page 10

10
Spacer
Front Wheel
• Fit a spacer into the hole on each side of the front wheel.
11
Front Fork
Ends
Front Wheel
• Fit the front wheel (with spacers inserted) between the
ends of the front fork.
• Insert the axle through one side of the front fork,
the front wheel and out through the other side of the
front fork.
Assembly
Spacer
Axle
10
12
• Attach the 9 / " lock nut to the end of the axle. While
16
holding the lock nut with an adjustable wrench, tighten
the axle with a / " wrench (or another adjustable
9
16
wrench). Do not over-tighten.
13
PULL
• Check to be sure the wheel is secure on the front fork.
Pull the wheel down. It should not move. If it does move,
tighten the axle a few more turns with the
(or another adjustable wrench).
IMPORTANT! Assembly is now complete, but you must
adjust the hand brake before first time use. Please
proceed to the section Adjusting the Brake, page 11.
9 / " Lock Nut - 2
16
SHOWN ACTUAL SIZE
PULL
9 / " wrench
16