Using Usb Flash Drive (Usb Memory); Saving Data To A Usb Flash Drive (Save Backup) - Roland TD-11 Owner's Manual

Settings for the Entire TD (SYSTEM)
Using USB Flash Drive
(USB Memory)
1.
First connect your USB flash drive to the TD (p . 9) .
2.
In step 4 of the basic procedure (p . 34), choose
"USB Memory" and then press the [F3] (ENTER)
button to access the USB MEMORY screen .
3.
Use the cursor buttons ( / ) to select the
desired menu item .
You can choose from the following menu items.
Menu Description
Save Backup Save data to the USB flash drive.
Load data from the USB flash
Load Backup
drive into the TD.
Delete data from the USB flash
Delete Data
drive.
View information about the USB
Information
flash drive.
Format Format the USB flash drive.
Saving Data to a USB Flash Drive
(Save Backup)
Here's how to save TD data to a USB flash drive.
Data that will be saved
• All drum kits
• System settings
38
1.
Choose "Save Backup" and press the [F3] (ENTER)
button (p . 38) .
2.
Use the value dial to select the save-destination
number .
Next you can assign a name to the data that will be
saved.
If you don't need to assign a name, proceed to step 7.
3.
Press the [F2] (NAME) button .
The SAVE screen will appear.
You can assign a name of up to eight characters.
4.
Press the [F1] ( ) or [F2] ( ) button to move the
cursor to the character that you want to change .
5.
Page
Use the value dial to change the character .
p. 38
Here you can hold down the [F3] (DEL/INS) button and
use the [F1][F2]buttons to delete or insert a character.
p. 39
Button
p. 39
[F3]+[F1] (DEL)
p. 40
p. 40
[F3]+[F2] (INS)
6.
When you've assigned a name, press the [EXIT]
button to return to the previous screen .
7.
Press the [F3] (SAVE) button .
* If you select a number in which data has already
been saved, and then press the [F3] (SAVE) button,
a confirmation message will appear, asking you
whether you really want to overwrite the data.
If you decide to cancel, press the [F1] (CANCEL)
button and then reselect the save-destination
number.
If it is OK to overwrite the existing data, press the [F3]
(OK) button.
When the data has been saved, the screen will indicate
"Completed. "
Description
Deletes the character at the cursor
location, and moves the subsequent
characters one place to the left.
Inserts a space at the cursor location
and moves the subsequent characters
one place to the right.