Assigning A Function To The Pedals; Assigning A Function To The Pedals - Roland RG-1F Owner's Manual

Making Various Settings

Assigning a Function to the Pedals

You can assign functions to the left pedal and center pedal so
that the assigned function will be activated when you press the
corresponding pedal.
You can save this setting in the RG-1F/RG-3F's memory
using the Memory Backup function (p. 72).
1.
Press the [Piano Designer] button so the indicator is lit.
2.
Use the [▲] [▼] buttons to select "9. Function."
3.
Press the [Enter] button.
4.
Use the [▲] [▼] buttons to select the pedal whose
settings you want to make.
fig.d-Func-PedalC.eps
Parameter Description
Pedal Cent Assign a function to the center pedal.
Pedal Left Assign a function to the left pedal.
5.
Use the [+] [–] buttons to select the function that will be
assigned to the pedal.
Value Description
The pedal will operate as a sostenuto
Sostenuto
pedal (p. 20).
The pedal will operate as a soft pedal (p.
Soft
20).
Play/Stop The pedal will start or stop playback.
When using Dual performance (p. 23),
playing without holding down the pedal
will sound only the tone of the tone
button at the left. When you play while
holding down the pedal, the other tone
will be layered onto that tone. The volume
Pedal EX
of the added sound will depend on how
deeply you press the pedal.
* A pedal assigned to the "Pedal EX"
function will not do anything if you're
not using Dual performance.
When you play the keyboard while
holding down the pedal, notes one octave
above the keys you play will be added to
Octave the notes you play.
The volume of the added upper octave
will depend on how deeply you press the
pedal.
70
6.
Press the [Piano Designer] button several times to make
the indicator go dark.