Table of Contents
Advertisement
(2) releasing procedure of the warning
3 Perform clearing remaining time up to the replacement.
When button C of the tem you desre to clear s pressed, the
tme of replacement clear screen s dsplayed. When CLEAR
button
F s pressed, the remanng tme up to the re-
placement s cleared.
F
4 Display the threading diagram.
When threadng button
G
and nspecton screen s pressed, the needle thread threadng
dagram s dsplayed.
Observe t when performng threadng.
When the desgnated nspecton tme s reached, the warnng
B
screen s dsplayed.
In case of clearng the nspecton tme, press CLEAR button
A . The nspecton tme s cleared and the pop-up s closed. In case
A
of not clearng the nspecton tme, press CANCEL button
and close the pop-up. Every tme one sewng s completed, the
warnng screen s dsplayed untl the nspecton tme s cleared.
Warnng Nos. of the respectve tems are as follows.
• Needle replacement
• Cleanng tme
• Ol replacement tme
– 90 –
G dsplayed n the mantenance
: A20
: A202
: A203
B
Advertisement
Table of Contents
