JUKI AP-876/IP-420 Instruction Manual page 83

[Media pattern]
A B
E
C
Button and display
FOLDING TIMING
A
CHANGE button
PRESSER DOWN button
B
PATTERN NO. SETTING
C
button
PATTERN TYPE SETTING
D
button
PATTERN LIST button
E
NEEDLE THREAD
F
TENSION SETTING
button
E
Ths s the button to change the order of foldng-tmng operaton and to change
enable/dsable of the foldng unt.
/ Refer to "@-2-11. changing the folding timing"
The presser plunger comes down, and the presser down screen s dsplayed.
"@-2-14. Lowering the presser"
/ Refer to
Pattern No. s set.
Regstered pattern No. s retreved usng PLUS button H and MINUS button I .
Pattern type is specified. The pattern type is changed over among the following
three dfferent ones usng PLUS button H and MINUS button I to select a
desred one.
: User's pattern
: Drect pattern
The selected pattern type s ndcated on edt data dsplay O .
*A type to whch no pattern s regstered cannot be selected.
Pattern No. and type whch are currently selected are ndcated on the button.
When the button s pressed, the selected pattern lst screen s dsplayed for the
pattern selecton.
The current needle thread tenson reference value s ndcated on the button.
When the button s pressed, the thread tenson reference value can be changed.
Durng the settng procedure, the thread tenson reference value s ndcated on
edt data dsplay O .
The thread tenson value s ncreased/decreased n ncrements of  usng PLUS
button H or MINUS button I .
"@-2-8. changing item data"
/ Refer to
– 79 –
[Direct pattern]
Description
p.45.
p.52.
: Vector form data
p.41.