Features Of The Rhfe-431Wta Units/Safety Devices - Rinnai RHFE-431WTA Owner's Operation And Installation Manual

FEATURES OF THE RHFE-431WTA UNITS
N
Clean Heating Forced Flue Type
N
Easy Operation One-Touch Ignition
N
Sensible Temperature Control Feature
N
Comfortable Room Temperature Control and Display
N
Warm Air Outlet at Floor Level ( Keeps Your Feet Warm )
N
Child Safety Function Lock
N
Room Temperature Setting Memory
N
Dirty Air Filter Indicator Lamp
N
Energy-Saving Economy Setting
N
Humidifier Tray
N
Air Flow Directional Louvers
N
Direct Vent Easily Installed
N
Proportional Heating Variable Capacity
N
Hush! Quiet Operation
N
Modern Design Minimizes Floor Space Requirements
N
Failure Message Display
N
Timer Override Mode
Spark Safety Device: Automatically shuts unit down when there is an abnormal spark at time
Flame Failure Device: Activated when burner flame fails. This prevents raw gas from being
Overheat Switch:
Fusible Links:
Overcurrent Prevention Device:
Power Outage Safety Device:
SAFETY DEVICES
of ignition.
released.
This device automatically cuts the gas off if the heater exceeds a
predetermined temperature. This is normally caused by an
obstruction in front of the louvers, or a blocked fan filter.
Backs up the overheat switch. If the fusible link cuts the unit off, a
service call by an authorized person is required to replace the link.
This is a 3 amp. glass fuse found on P.C. board. Design
to shut unit down in case of overcurrent. If fuse blows all
indicator lamps will be "OFF".
This safety device cuts off gas passage and stops
operation.
– 1 –