Table of Contents
Advertisement
TO OPEN THE CONTROL PANEL
Lift lightly in the center of the lid. The control
panel lid will then drop backward to an angle.
Note: When the appliance is first
plugged in or after a power failure
longer than 24 hours the display
will show "PF".
SETTING THE CURRENT TIME & DAY
(This example shows setting the clock to 8:20am on Saturday).
DAY OF THE WEEK
Press the "Clock" button
1
once. The day of the week
Select
and
is displayed.
Clock
Press either of the " " or " "
2
buttons until the correct day of
the week is displayed.
Press the "Select" button once
3
to lock in and complete day of
the week selection. The time of
day will then flash.
TIME OF DAY
To set the time press the " "
4
or " " buttons until the correct
time of day is displayed.
Pressing either button once will change the time in single minutes.
Holding eigther button down will change the time rapidly, first in minutes, then in hours.
CONFIRM SETTINGS
Press the "Select"or "Clock"
5
button once to lock in and
complete setting the time.
Select
The
indicators will go out.
Clock
SETTING THE CLOCK
Select
Mo
Clock
Select
Sa
Clock
am
Select
Sa
Clock
am
Select
Sa
Clock
am
Sa
– 24 –
Programming
Clock
Select
Timers
Programming
Clock
Select
Timers
Programming
Clock
Select
Timers
Programming
Clock
Select
Timers
Programming
Clock
Select
Timers
Hide quick links:
Advertisement
Table of Contents
