Rinnai RHFE-431WTA Owner's Operation And Installation Manual page 29

PROGRAMING THE WEEKLY TIMERS
The following is a general outline of the setting options and procedures avaliable when
programing the weekly timers. A detailed step-by-step example is given on pages 28 to 29.
Note: Before programing the current time and day must be set. See page 24 for instructions.
The weekly timers can be easily programed by following the steps illustrated below:
Press the "Timers"
1
button once to
activate the timer
programing mode.
Timers
2
Select the day or
group of days you
wish to program by
pressing the "up" and
"down" buttons:
Choose from the
following options:
Mo Tu We Th Fr Sa Su
Mo Tu We Th Fr
Sa Su
or each day of the
week in turn.
If a group of days is
chosen, the times and
temperatures selected
in steps 3 5 will
automatically apply
for those days.
Press the "Select"
button to confirm your
choice.
Select
6
3
Repeat steps
7
Press the "Timers" button again to confirm your program and lock in all settings.
For a description of how to operate the heater with these programed settings, turn to page 26.
3
Select the period you wish
to program by pressing
the "up" and "down"
buttons:
Periods 1 4 will
automatically appear in
order as you follow this
programing sequence, so
you may not need to
manually select a timer
period.
Press the "Select" button
to confirm your choice.
Select
5
for periods 1 through to 4 until you are happy with all the settings.
am
Mo Tu We Th Fr Sa Su
1 2 3 4 OFF
4
Set the start time for this
period by pressing the
"up" and "down"buttons:
The time will move up or
down in 10 minute
increments.
Each period must be set
to a later time than the
period before it.
No period can be set
past 11:50pm, as this is
the end of the 24hour
program.
Press the "Select"button
to confirm the time.
Select
– 27 –
Set
Auto
Man Override
Select
Clock Temp R
5
Set the temperature
you want for this period
by pressing the "up"
and "down" buttons:
Choose from the
following temperature
settings:
H(high) 80
and
- - (OFF)
If you want heat during
this period, choose a
temperature.
If you do not want heat,
choose the OFF setting.
Press the "Select" button
to confirm the
temperature setting.
Select
Frost
Progr
60 L(low)