Cording - Janome MC 11000 Instructions Manual

Cording

Use the cording foot H to sew over one or three strands
of cording.
Knitting yans, embroidery flosses, lace threads and fine
wool tarns can be used for cording.
Attach the cirding foot H.
Select pattern S2 for three strands cording.
NOTE:
Pattern U9 (triple zigzagg stitch) can also be used.
Insert three strands of cording under the spring on the
foot. Make sure to pass each strand separately under
the spring.
1 Spring
Pull 10 cm (4") of strands under the foot and to the rear.
The grooves on the bottom of the foot will hold cordings
in place while stitching over the cordings.
Sew carefully over the cordings while guiding the
strands parallel and even.
For a single strand cording, insert a strand into the
center groove on the foot.
Select pattern U4 (zigzag stitch) and adjust the stitch
width in accordance to the thickness of the cording.
43