Windows Vista And Windows 7 - Setup Instructions - ION MixMeister EZ Converter Setup & Troubleshooting

Windows Vista and Windows 7 – Setup Instructions
Before you begin:
1. Make sure you have the latest version of
www.ionaudio.com/ezvc
from our website.
2. Once the EZ Converter is installed on your computer, connect your USB Recording
device using the included USB cable to an available USB port on your computer.
TIP: not all USB ports are created equal. Although most ports will work with
printers and mice, some computer's ports may not be suitable for use with
recording devices. We recommend connecting directly to a port on your PC,
instead of using USB hubs or splitters. If your desktop PC has USB ports both
on the front and on the back, we recommend using ports located on the back of
the PC.
3. If your product has a Power button (some products do not), make sure it is switched to
the ON position.
4. Close all programs that are open on your computer.
Setup Procedure:
1. Click the Start button in the lower-left of your screen, and select Control
Panel. The Windows 7 Control Panel window will open.
2. In the Control Panel window, double-click Hardware and
Sound.
3. In the next window, double-click Sound. The Sound
Control Panel window will open.
4. At the top of the window, select the Playback tab.
Under Playback, choose the device that you would like
your computer's audio to come out of.
TIP: Your computer's audio outputs may
appear as Speakers – High Definition Audio
Device or Headphones – High Definition
Audio Device or both, depending on the
hardware installed in your computer. The
exact mane of your sound card will vary from
PC to PC
Some common PC soundcard names are
Realtek, Soundmax, and Sigmatel
Click on the device that best matches your desired audio setup.
NOTE: do NOT choose Speakers – USB Audio Codec as your playback
device. This represents your ION Audio USB recording device, and can only be
used as a recording input, not a playback output. Also, make sure not to choose
Modem as your playback device.
EZ Converter
to download. Install the software program after downloading it
installed. Visit
2