Rear Panel Features; Selecting A Kit - ION PRO SESSION Module Overview

REAR PANEL FEATURES

POWER IN – Connect the power adapter here, then
1.
connect the adapter to wall power before turning on the
module.
POWER SWITCH – Turns the module on or off.
2.
HEADPHONES – To practice quietly, you can connect
3.
a set of headphones with 1/8" jack to this output.
STEREO OUTPUT – This is the main stereo output.
4.
Connect this output to a speaker system or amplifier.
MIX INPUT – If you'd like to play along with your CD or
5.
MP3 player, connect your player to this 1/8" input.
KICK TYPE SWITCH – Set this switch to select the
6.
type of kick drum you are using with the module.
Select "SWITCH" if the kick pedal is a simple
footswitch. Select "PAD" if the kick pedal is a velocity-
sensitive pad (with a standard kick drum pedal).
Note: Use the "Switch" setting with the pedal included
with this kit.
TRIGGER INPUT CONNECTION – Connect the included cable snake to this connector, then connect
7.
the cables to their respective triggers.
instructions.
KITS
What is a Kit? A Kit is a collection of different drum sounds. You can quickly change the sound of the drums
by selecting a different Kit. The drum module holds up to 15 Kits – 10 Preset and 5 User Kits.
Preset Kits are kits that we have put together for you to use out-of-the-box. User Kits are custom kits that
you can create yourself, using the included sounds.

SELECTING A KIT

The module comes with 10 Preset Kits (001 – 010) and
5 User Kits (011 – 015). To select a kit:
1. Press KIT to enter Kit Select Mode. The LCD will
display the current Kit number (001 – 010) and
the Kit Indicator will light up.
2. Use VALUE +/- to select a Kit.
3. To adjust the Kit's volume (which is different from
the module's
VOLUME to enter Volume Adjustment Mode.
The Volume Indicator will light up and the LCD
will display the Kit's current volume. Use VALUE
+/- to adjust it.
When you are finished, press KIT to re-enter Kit
Selection Mode or press another button.
master volume level),
See the included separate Assembly Guide for setup
press
Note: While you are in Record Ready Mode, the LCD
will display the current kit's volume, but you will not be
able to adjust it.
2