IMC Networks iMcV-DS3/E3/STS Operation Manual page 5

Managed Modules
To manage iMcV-DS3/E3/STS modules, an SNMP agent must be present; the
iMediaChassis requires an SNMP management module. For a managed
environment, first manually configure all of the desired DIP Switch selectable features
to match what will be configured through the SNMP Management Module.
Use the Graphical User Interface (GUI) to enable features by using the iView
management software. In a managed chassis, the software settings take priority over
the SNMP enabled feature DIP Switch settings. Make sure that the software settings
match the desired configuration requirements for the installation.
Before installing the modules, they must be configured for Host/Remote via the DIP
Switches. The Master/Slave condition requires this configuration:
S1-10: ON Remote Unit Enabled (only at the REMOTE end) (Remote)
S1-10: OFF Remote Unit Disabled (only at the LOCAL end) (Host)
iView² Management Software
iView² is the IMC Networks management software designed specifically for the IMC
Networks "iMcV" family of modules. It features a GUI and gives network managers
the ability to monitor and control the manageable IMC Networks products.
iView² is available in several versions, including WebServer version 3.0, and can also
function as a snap-in module for HP OpenView Network Node Manager and other
third party SNMP Management software. For assistance in selecting the right version
of iView² for your operating system, please visit:
http://www.imcnetworks.com/products/iview2.cfm
2
iView supports the following platforms:
•
Windows 2000
•
Windows XP
•
Windows Vista
•
Windows 7
Please see the SNMP Management Module installation guide for software
configuration options.
IMC Networks' iView
NOTE
NOTE
2
software is available for downloading from the web site:
www.imcnetworks.com.
2
2
SNMP